General Procedures

CMS/DRL Impedance information (EEG and stimulation)
Importance CMS/DRL for EEG  The CMS is the reference channel, compared to which all the EEG signals are measured. The DRL is responsible for bringing ...
Wed, 1 Oct, 2025 at 12:23 PM
Disinfection of Devices and Accessories
Due to frequent requests with regards to disinfection, Neuroelectrics aims to provide our customers with guidance ensuring the performance and safety charac...
Mon, 12 Jan, 2026 at 6:22 PM
Decrease the Impedance
Before recording, please verify that the EEG cap fits the head and that each electrode makes consistent contact with the scalp.   Begin by activating the i...
Wed, 1 Apr, 2026 at 4:46 PM
Headcap Size
If there is overlap, use the immediate smaller size. Our headcaps have been developed to accommodate the vast majority of users. They are specif...
Wed, 25 Feb, 2026 at 10:07 AM
Life Time of devices and accesories
Every Device and Accesory is certified to comply with the highest standards for at least the following period of time since their manufacturing date: Ne...
Thu, 29 Jan, 2026 at 12:52 PM
Warranties
Enobios / Starstims:    Standard: 2 years    Gold: 5 years Batteries:    1 year or 300 cycles Cables:     1 year Headcaps:     1 year T...
Fri, 27 Feb, 2026 at 2:17 PM
Extracephalic References for Stimulation
Neuroelectrics has not tested and does not recommend the use of extracephalic references for stimulation protocols. However, if a researcher or clinicia...
Fri, 20 Feb, 2026 at 12:24 PM
Using mixed electrodes
Can I run an EEG protocol using mixed electrode types (Dry, Gel, and Foretrodes)? Yes. It is possible to perform an EEG recording using a combination...
Wed, 25 Feb, 2026 at 12:57 PM
Dell Laptop Troubleshooting Guide
This is a guide for troubleshooting the Dell laptop purchased from Neuroelectrics. Neuroelectrics only distributes this laptop. If any furhter assistance i...
Thu, 12 Mar, 2026 at 12:22 PM
Troubleshoot: How to lower high impedance values on Enobio?
This guide will walk you through the steps to improve impedance levels when working with an Enobio system. We recommend following the workflow step by step...
Tue, 19 May, 2026 at 11:35 AM